Item Description
Rapid Band Change Wishbones for Standard and Small ID tubing
MAKO Spearguns Rapid Band Change Wishbones make changing bands fast and easy.
NO SLITS IN YOUR MUZZLE? ...NO PROBLEM!
NO CUTTING NEEDED TO REMOVE BANDS
NO TOOLS NEEDED TO RE INSTALL BANDS
EASY ON AND EASY OFF!
Install, remove and re-install your bands as often as you like, quickly and easily.
NOTE: DO NOT USE 1/16" SMALL ID RAPID CHANGE WISHBONES ON REGULAR ID TUBING.
MAKO Speargun bands are the best in the world because they are made by Primeline Industries USA. If it isn't Primeline, it is not the best.
Includes:
- Two loop knots hand dipped in rubber to prevent water intrusion into bands (Small 1/16" ID Only) OR Two beaded loops (for Standard 1/8" ID)
- One Dyneema wishbone
No slits in your muzzle? NO PROBLEM!
Rapid Change Loop Knot Wishbones for 1/16" ID tubing
Rapid Change Beaded Wishbones for 1/8" ID tubing
Wishbone Tying Instructions
Step 1
Insert the knotted end of the white dyneema cord through the loop.
Step 2
Wrap the white dyneema cord around the loop, creating a loop in the white dyneema cord.
Step 3
Insert the knotted ball end into the loop you just created with the white dyneema cord.
Step 4
Pull tight, tightly cinching the white dyneema cord onto the black corded loop knot.
