Item Description
Estimated Availability April 2024
MAKO 4 Atmosphere Spearfishing Torpedo Float
(Highest Rated Float Ever Produced)
45 PSI The highest rated float ever produced!
The MAKO 4 Atmosphere Spearfishing Torpedo float is the best high pressure spearfishing float available.
- Highest pressure rating of any spearfishing float ever produced.
- Rated at 4 atmospheres.
- Can handle 45 PSI inflation.
- Has a volume of 44.5 Liters.
- Provides 98 pounds of lift at a depth of 99 feet
- Maintains floatation deeper than 180 feet.
- No other float has this!
Not only is the MAKO 4 Atmosphere Spearfishing Torpedo Float the highest rated float ever made, it is so jam packed with additional features, we provide a checklist, below to show you why the MAKO 4 atmosphere spearfishing torpedo float is the best spearfishing float available.
Compare with any other spearfishing float!
Features | MAKO | Other |
Max Pressure | 45 PSI | 29 PSI |
Lift | 98lbs at 99 feet | 90lbs at 60 feet |
Max Flotation Depth | Deeper than 180 ft | 100 ft |
Volume | 44.5 liters | 33 liters |
Rubberized handles for safety | Yes | No |
Shrader valve (no adaper needed) | Yes | No |
Removable flag pole holder (no snags) | Yes | No |
SOLAS reflective material | Yes | No |
Optional interior balast | Yes | No |
Optional exterior ballast | Yes | No |
Optional floatlilne clutch | Yes | No |
Includes rescue mirror | Yes | No |
Easily replaceable bladder | Yes | Some Yes / Some No |
Outer and inner jackets | Yes | Some yes / Some no |
Includes air pressure guage | Yes | Some Yes / Some No |
Includes safety whistle | Yes | Some Yes / Some No |
Optional dive flag and pole | Yes | Some Yes / Some No |
Optional tuna bunie (2x stretch) | Yes | Some Yes / Some No |
Heavy duty stainless steel D ring | Yes | Yes |
Max Pressure: 45PSI
Lift at 99 feet: 98 pounds
Positive floatation deeper than 100 feet: Yes
Inflated dimensions: 41” long x 12” wide (35” girth)
Volume: 44.50 liters
3 Molded Rubberized Handles: Handles save lives. Floats without handles lack the most important safety feature. The MAKO float has 3 handles, and, they are all completely rubberized reinforced to provide an extra layer of safety. (NOTE: DO NOT BUY A FLOAT WITHOUT RUBBERIZED MOLDED HANDLES!)
Side mounted inflate valve: By positioning the inflate valve to the side (instead of on top), the MAKO float does not get hung up on your buddies floatline. The MAKO float can pass under without catching on the inflate valve because it is located to the side of the float.
Totally removable dive flag pole holder: Permanently fixed flagpole holders are also notorious for getting caught on your buddies floatline. The MAKO dive flag pole holder is completely removable so your buddies floatline can pass right over without getting snagged on the flagpole holder.
Schrader valve is easily fillable by a bicycle pump, air compressor or scuba tank. No clumsy attachment needed.
Easily replaceable Urethane Bladder: Floats with replaceable bladders are by far better than floats without bladders. If you have a float that does not use a bladder, you are totally screwed if someone accidentally pops your float with a spear tip. However, with the MAKO Float, you can quickly and easily replace your bladder and be back in the water in just minutes.
Super Durable vinyl coated outer jacket in high vis yellow for maximum safety.
Up armored inner jacket equalizes the outward pressure of the bladder while providing additional protection to the bladder from punctures.
Easy access side zipper with durable gate keepers with stainlesss steel hooks makes access to the bladder quick and easy.
SOLAS reflective material installed on outer jacket for an added layer of security. Highly reflective material is crucial for marine night rescues.
Stainless steel D ring (Heavy Duty) Yes
Includes air pressure gauge: Yes
Includes Schrader valve core removing tool: Yes
Optional dive flagpole includes safety ball: Yes
Optional dive flag “all states legal” includes stiffener: Yes
Ballasting options for keeping flag upright:
Option #1: 2 pound exterior weight and weight strap
NOTE:
- If using in hot temperatures, only inflate float to approximately 29 PSI. This will allow for the increase in PSI caused by excessive heat.
- Check air pressure during and after filling.